Proximity Sensors
Proximity Sensors
PB 28
Anti-slip metal cross-linked polymer emulsion
- Anti-slip effect tested by UL laboratories
Wash resistant with alcohol-based disinfectants
Self-polishing effect, can also be used on stone floors
Features
Emulsion formulated with acrylic and polyurethane polymers to guarantee the formation of a high gloss, resistant and flexible film. Excellent resistance to abrasion. Resistant to washing with disinfectants, even alcohol based, if used correctly and with the correct dilution. Registered with Underwriters Laboratories Inc. as anti-slip, high resistance wax.
Dilution
Ready to use.
How to use
After carefully removing wax using a wax stripper from the SUTTER PROFESSIONAL range, apply two coats of wax using the special wax applicator. Leave to dry approximately 30 - 60 min. between one coat and the next. Also suitable for UHS spray cleaning or spray buffing maintenance.
Warnings
May cause an allergic skin reaction. Harmful to aquatic life with long lasting effects. Avoid breathing vapours. Wear protective gloves and eye/face protection. If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Contains METHYLCHLOROISOTHIAZOLINONE, METHYLISOTHIAZOLINONE. May produce an allergic reaction. Contains ZINC AMMONIA CARBONATE COMPLEX.
Note
Protective wax for floors. Do not apply PB 28 at temperatures below 10° C. Keep away from freezing. Some floors may be difficult to penetrate and/or anchor the treatment. Check adherence in a small area of the floor before applying the product. Sutter Professional cannot be considered liable for any damages due to improper product use.
Only for professional use. Safety data sheet available on request.