top of page

Beton

Acrylic sealer for concrete and porous floors

Beton
    Suitable for porous floors (ex.terracotta floors etc..)
    Anti-dust effect and anti-stain effect
    Resistant to heavy traffic

Features
Acrylic sealer specially designed for very porous floors. Anti-dust effect and resistant to heavy traffic. Excellent anti-stain effect.

Dilution
Ready to use.

How to use
After carefully removing wax and any saltpetre deposits, apply two coats of sealer using the special wax applicator (the first coat should be diluted with 50% water to make impregnating easier). Leave to dry approximately 45 min. between one coat and the next.

Warnings
If medical advice is needed, have product container or label at hand. Keep out of reach of children. Contents METHYLCHLOROISOTHIAZOLINONE, METHYLISOTHIAZOLINONE: May produce an allergic reaction.

Note
Check that the sealer adheres to concrete floors and do not apply BETON at temperatures below 10° C. Keep away from freezing. Some floors may be difficult to penetrate and/or anchor the treatment. Check adherence in a small area of the floor before applying the product. Sutter Professional cannot be considered liable for any damages due to improper product use.
Only for professional use. Safety data sheet available on request.

bottom of page